356.01 - Skate Wheel Transfer, One Output (Pneumatic)
customizable
Downloads:
Folgende Downloads stehen für dieses Produkt zur Verfügung:
Datenblatt | ||
2D-CAD Layout | ||
3D-CAD Layout |
The next intralogistics skate wheel transfer 356.01 is suitable for optionally discharging transport of containers, cardboard boxes and other load carriers up to 50 kg/m. Alternatively, the skate wheel transfer can discharge on ons side in different angle settings (30° - 50°). The drive of the skate wheels is described for reversing operation. Swiveling into the angle position is defined by the stroke of the pneumatic cylinder and its setting at the lever module. At a minimum conveyor height of 235 mm, speeds of 0.17m/s to 1m/s are possible. Starting at a clamping length (convey- or width) of 750 mm, two cylinders are used for swiveling the skate wheels. Depending on the clamping length and conveyor length, several motor rollers are used for driving the skate wheels.
The load is moved in the conveyor direction by the skate wheels and their rotation. The skate wheels are lifted slightly in this. |
The combined movement of the skate wheels permits deflection of the load at an angle of 30° to 50°. The direction change will lead to ejection of the load. It can be ejected on one side (left or right) in the conveyor direction. |
Gewichte |
Nutzlast (inkl. LHM) je Stellplatz [kg] |
max. 50 (Poly V) |
max. 35 (Rundriemen) |
Dynamik |
Fördergeschwindigkeit [m/s] |
0,1 - 1,0 |
|
Schwenkzeit [s] |
0,35 |
||
Aktorik |
Antriebsleistung Tragrollen [kW] |
0,05 |
|
|
Antriebsleistung je Röllcheenstrang [kW] |
0.05 |
|
Umgebung |
Temperaturbereich [°C] |
5 - 40 |
|
Luftfeuchtigkeit [%] |
max. 80 |
||
Oberfläche |
Abdeckleiste |
hellgrau / schwarz / rot / signalblau / gelbgrün / signalgelb |
|
Stahlteile |
galvanisch verzinkt / sendzimir verzinkt |
||
Aluminiumteile |
natur |
Abmessungen in mm, Standardausführung - Sondermaschinen auf Anfrage
Geometrie |
Rollenteilung (T) |
55 |
||||
Röllchenteilung (RT) |
75 |
|||||
Fördergutbreite |
abhängig von EL, maximal empfohlen 1000 |
|||||
Fördergutlänge |
min. 225 |
|||||
Stranganzahl |
2 |
3 |
4 |
5 |
6 |
|
Förderlänge (FL) |
385 |
495 |
550 |
605 |
715 |
|
Gesamtbreite (B) |
EL + 60 |
|||||
Gesamtbreite mit Zubehör |
B + 35 |
|||||
Einspannlänge (EL) |
356 / 450 / 550 / 650 / 750 / 850 / 950 / 1050 |
|||||
Förderhöhe (FH) |
min. 235 |
|||||
Förderrichtung |
reversierbar |
|||||
Tragmittel |
Röllchen / Rollen (zylindrisch) |
|||||
Rollendurchmesser (RD) |
50 |
|||||
Röllchendurchmesser (RÖD) |
50 |
|||||
Förderwinkel (α) [°] |
30 / 35 / 45 / 50 |
Abmessungen in mm, Standardausführung
Lieferumfang gemäß Konfiguration |
Röllchenweichen ermöglichen eine hoch dynamische Ausschleusung von Fördergut in einem Winkel von 30° bzw. 50° zur Förderrichtung. Das Fördergut behält hierbei seine Orientierung bzgl. der Förderrichtung. Röllchenweichen sind mit zwei bis sechs Röllchensträngen verfügbar. Die Anzahl der Röllchenstränge und die Wahl des Förderwinkels richten sich hierbei nach Fördergut, Gewichtsverteilung und Fördergeschwindigkeit.
Gleichmäßige Beladung ≥ 2 Stränge
Ungleichmäßige Verteilung / großes Fördergut ≥ 6 Stränge
Bei Fragen zur Dimensionierung steht Ihnen der next intralogistics Anwendungssupport gerne zur Verfügung.